Vectan Reloading Powders Logo

Vectan Reloading Powders

Looking for a suitable powder for short or long weapons? Then the French VECTAN powders are the answer! Over three centuries, acquired skills and precise expertise meet a modern, forward-looking research and development facility. Under strict controls, the usual quality is ensured. The precise and first-class powder varieties leave fulfil all desires.

SNPE Vectan A0 Reloading Powder
SNPE Vectan A0

Manufacturer number: A0

This powder burns a little slower than Ba  9 and is also a little more versatile. In some pods, the charge can be increased moderately without getting into overpressure areas.
SNPE Vectan BA 9 Reloading Powder
SNPE Vectan BA 9

Manufacturer number: BA 9

The powder was first made for the 9 mm Parabellum. It is suitable for medium handgun cartridges. Since it is of relatively high energy yield, it should not be used in old or antique weapons whose locks are no longer as stable
SNPE Vectan BA10 Reloading Powder
SNPE Vectan BA10

Manufacturer number: BA10

This range is particularly adapted for handgun reloading. All the powders of this range are absolutely clean burning and have now the same dimension.The fastest powder for handguns from the Nobel Sport range. It is ideally suited for target alloys with wadcutter bullets. So far one of the most popular propellant powders of the 'Vectan' series
SNPE Vectan BA6 1/2 Reloading Powder
SNPE Vectan BA6 1/2

Manufacturer number: BA6 1/2

Ba6 1/2 : it is the slowest powder of this range. It was specially designed for handguns Magnum , it is also perfectly adapted to reload small rifle calibers such as .22 HORNET and .30 calibers.
SNPE Vectan BA7 1/2 Reloading Powder
SNPE Vectan BA7 1/2

Manufacturer number: BA7 1/2

Ba7 1/2 : created to extend reloading possibilities. It gives excellent results for 9mm Luger, 10mm Auto, and .45ACP
SNPE Vectan BA9 1/2 Reloading Powder
SNPE Vectan BA9 1/2

Manufacturer number: BA9 1/2

Ba9 1/2 : this new powder between Shooters World traditional Ba10 and Ba9 covers a wide range of calibers and is perfectly adapted to the 9 x 19mm, .38 Super Auto, .38 Special, .357 Mag., .40S&W, .44S&W Special, .44 Remington Magnum, .45ACP, .45 Colt
SNPE Vectan SP 10 Reloading Powder
SNPE Vectan SP 10

Manufacturer number: SP 10

Slightly slower than Tubal 3000. Suitable for slightly heavier bullets in the smaller calibers and with higher power for large-volume cases with heavy bullets, such as the .35 Rem., .375 Winchester and even the .458 Winchester Magnum.
SNPE Vectan SP 11 Reloading Powder
SNPE Vectan SP 11

Manufacturer number: SP 11

This is a very flexible powder that can be used in a wide range. It has been extensively tested by the manufacturer and was just as convincing in small, fast calibers as 5.6x57 and .224 Weatherby Magnum and also in medium calibers (7x57, 8x57, 7x64) as in the 7mm Remington Magnum or the 7x66 from Hofe SE. It has similar properties to the very popular Vihtavuori N 140.
SNPE Vectan SP 13 Reloading Powder
SNPE Vectan SP 13

Manufacturer number: SP 13

This is a two-base special powder for cases with the largest capacity such as the .300 Pegasus, .338 Excalibur, .50BMG and the like. In these large calibres, this powder achieves the highest level of performance and precision.
SNPE Vectan SP 7 Reloading Powder
SNPE Vectan SP 7

Manufacturer number: SP 7

A wide range of rifle powders, ranging from the .222 Rem to medium calibers such as .30-30 Win., 7x57, 7x64, .303 British, to Magnum calibers such as .300 Win. Mag. Suitable with light to medium bullets.
SNPE Vectan SP 9 Reloading Powder
SNPE Vectan SP 9

Manufacturer number: SP 9

This is a two-base ball powder that is particularly suitable for the .243 Winchester, .30-30 Winchester and .308 Winchester calibres.
VECTAN Reloading Guide 2016
VECTAN Reloading Guide 2016
The VECTAN Reloading Guide 2016 contains the official load data for all VECTAN powders. Click Tab "Datasheet" to view or dowload for free here.