Load data for caliber "7 x 64 Brenneke"
You find load data for cartridges in caliber 7 x 64 Brenneke with all common powders and bullets by clicking the "Loads in this caliber" button above.
Cartridge Use & HistoryThe 7×64mm (also unofficially known as the 7×64mm Brenneke, though its designer's name was never officially added as a part of the cartridge name) is a rimless bottlenecked centerfire cartridge developed for hunting. As is customary in European cartridges, the 7 denotes the 7 mm bullet caliber and the 64 denotes the 64 mm (2.5 in) case length. The 7×64mm is a popular hunting cartridge in Central Europe due to its 11.95 mm (0.470 in) case head diameter and 84 mm (3.3 in) overall length allowing it to easily be chambered in the Mauser 98 bolt action rifle that was once standard German military issue.
Technical Specifications(based on the respective safety standard - see more details in tab "Datasheet" if available)
|Caliber:||7 x 64 Brenneke|
|Bullet Diameter:||0.285 '' | 7.24 mm|
|Max. Case Length (l3):||2.52'' | 64.0 mm|
|Max .Cartridge Length / OAL:||3.31'' | 84.0 mm|
|Maximum Standardized Pressure:||60191 psi | 4150 bar|
C.I.P. is not a manufacturer but a safety standard: The Commission internationale permanente pour l'épreuve des armes à feu portatives ("Permanent International Commission for the Proof of Small Arms" – commonly abbreviated as C.I.P.) is an international organisation which sets standards for safety testing of firearms. (The word portatives ("portable") in the name refers to the fact the C.I.P. tests small arms almost exclusively; it is ordinarily omitted from the English translation of the name.) As of 2015, its members are the national governments of 14 countries, of which 11 are European Union member states. The C.I.P. safeguards that all firearms and ammunition sold to civilian purchasers in member states are safe for the users.
To achieve this, all such firearms are first proof tested at C.I.P. accredited Proof Houses. The same applies for cartridges; at regular intervals, cartridges are tested against the C.I.P. pressure specifications at the ammunition manufacturing plants and at C.I.P. accredited Proof Houses.
0 of 0 reviews